Quick answer An MPCB should be set from the motor nameplate current, but the final setting is acceptable only when the motor can start without nuisance tripping and the complete...Read More
Quick answer Select an MPCB whose adjustable thermal range includes the motor nameplate current. Then confirm that the device can tolerate the motor's starting current, safely handle the prospective short-circuit...Read More
The short answer An MCB mainly protects branch conductors against overload and short circuit. An overload relay protects a motor against sustained overcurrent and, depending on the design, phase-loss or...Read More
Quick answer A limit switch can provide normally open (NO), normally closed (NC) or changeover contacts. In the normal, unoperated position, an NO contact is open and an NC contact...Read More
Quick answer Limit switches used on cranes, conveyors and hoists must be selected around the actual motion, stopping point, environment and control logic. The right device should actuate reliably at...Read More
Quick answer kVAR capacitors should be selected by checking the required reactive power correction, system voltage, duty type, harmonic level, step size, switching sequence, panel design and site conditions. The...Read More
